XPL Series

Series XPL from thread sizes for Watchmakers until large size diameters 400, 500 or 600 mm

Product Documents

Product Brochure

Manuals

Category: SKU: MS-XPLxxx Tags:

Product Description

Masterscanner XPL Series Full-automated measurement, without human intervention, the machine displays all measured thread parameters per pitch in under 2 minutes. All measured values are compared with the built-in thread standards library, the system generates the measuring report automatically. The MasterScanner significantly reduces human error, as well as improves the measuring efficiency, quality, consistency and accuracy of the results. The MasterScanner is compliant with all requirements
for tractability of today as stated in ISO-9000 and ISO/IEC 17025:2005.

Get all parameters of cylindrical thread plug gauges, cylindrical thread ring gauges, taper thread plug gauges, taper thread ring gauges, plain ring gauges, plain plug gauges and other gauges with internal & external dimensions, including virtual pitch diameter , single pitch diameter, basic pitch diameter, major diameter, minor diameter, thread pitch, thread angle, half of thread angle, flank straightness, lead angle, taper, perpendicularity, etc.

 

 

MEASURING UNCERTAINTY:
XPL MODELS XPL-400 XPL-500 XPL-600
Thread ring gauges, parallel or tapered (minor diameter > 10mm/0,4 in, partial flank angles ≥ 27º)
Minor diameter 3,0 μm + 5.10-6·ι 3,0 μm + 5.10-6·ι 3,0 μm + 5.10-6·ι
Effective pitch diameter 3,0 μm + 5.10-6·ι 3,0 μm + 5.10-6·ι 3,0 μm + 5.10-6·ι
Thread pitch 1,0 μm + 5.10-6·ι 1,0 μm + 5.10-6·ι 1,0 μm + 5.10-6·ι
Flankangles (right and left side) 0°6’0” 0°6’0” 0°6’0”
Taper 0,1° 0,1° 0,1°
Thread ring gauges, parallel or tapered (minor diameter 2,5 to 10 mm / 0,1 to 0,4 in, partial flank angles ≥ 27º)
Minor diameter 3,5 μm + 5.10-6·ι 3,5 μm + 5.10-6·ι 3,5 μm + 5.10-6·ι
Effective pitch diameter 3,5 μm + 5.10-6·ι 3,5 μm + 5.10-6·ι 3,5 μm + 5.10-6·ι
Thread pitch 1,0 μm + 5.10-6·ι 1,0 μm + 5.10-6·ι 1,0 μm + 5.10-6·ι
Flankangles (right and left side) 0°6’0” 0°6’0” 0°6’0”
Taper 0,1° 0,1° 0,1°
Thread plug gauges, parallel or tapered (major diameter > 1 mm / 0,04 in, partial flank angles ≥ 27º)
Minor diameter 3,0 μm + 5.10-6·ι 3,0 μm + 5.10-6·ι 3,0 μm + 5.10-6·ι
Effective pitch diameter 3,0 μm + 5.10-6·ι 3,0 μm + 5.10-6·ι 3,0 μm + 5.10-6·ι
Thread pitch 1,0 μm + 5.10-6·ι 1,0 μm + 5.10-6·ι 1,0 μm + 5.10-6·ι
Flankangles (right and left side) 0°6’0” 0°6’0” 0°6’0”
Taper 0,1° 0,1° 0,1°
Plain gauges, parallel or tapered (Diameter > 10 mm / 0,4 in)
Plain ring gauge 2,0 μm + 5.10-6·ι 2,0 μm + 5.10-6·ι 2,0 μm + 5.10-6·ι
Plain plug gauge 2,0 μm + 5.10-6·ι 2,0 μm + 5.10-6·ι 2,0 μm + 5.10-6·ι
Taper 0,1° 0,1° 0,1°
Plain cylindrical or Taper gauge (Diameter from 1mm to 10mm / 0,04 to 0,4 in)
Plain ring gauge 3,0 μm + 5.10-6·ι 2,0 μm + 5.10-6·ι 3,0 μm + 5.10-6·ι
Plain plug gauge 3,0 μm + 5.10-6·ι 2,0 μm + 5.10-6·ι 3,0 μm + 5.10-6·ι
Taper 0,1° 0,1° 0,1°

Additional Information

Product name:

XPL MasterScanner Universal thread measuring machine
Models:

XPL-400, XPL-500, XPL-600
Max. Scanlength:

275mm
Inside measuring range:

2.5~400mm, 2.5~500mm, 2.5~600mm
Outside measuring range:

1.0~390mm, 1.0~490mm, 1.0~590mm
Resolution:

0.01μm
Min. thread pitch:

0.1mm
Measuring system:

Heidenhain Opto-electronic incremental linear encoder system.
Linear guidance:

Precision Air bearing
Measuring force:

0.07N (newton)
Computer:

Industrial measurement computer in 19'' cabinet
Actuators:

SWISS Controlled DC Actuators
Air Pressure Supply:

6 Bar, without oil and water
Electric power:

110V~220 volt 60/50HZ
Weight:

1100 kg, 1300 kg, 1400 kg
Dimension (cm):

181x115x93, 220x115x93
Manufacturer:

IAC Geometrical Engineers B.V.

The IACLIB library is an extensive Worldwide Standard Normalisation Library for thread gages Rings or Plugs
This is a non-exhaustive list which measure various thread gauges according to GB, ISO, BS, ANSI, DIN, JIS, GOST, API standards.
With comprehensive thread standards in IACLIB database, it meets requirements of most customers.

 

API Spec 5B: 10-2008 API 7-2, Non-Preferred API 7-2, Preferred
API Spec 5B : 10-2008 API Spec 7-2: non preferred 01-2008 API Spec 7-2: preferred 01-2008d
DIN 2999 DIN 7162, 1965 EN 10226-3 : 2005
EN 10226-3, 2005 G ISO 228/2 GB/T 10922-2006
GB/T 197-2003 GB/T 22091.1-2008 GB/T 22512.2-2008, Non-Preferred
GB/T 22512.2-2008, Preferred GB/T 3934-2003 GB/T 3934-2003
GB/T 9235.2 1999 GJB 3.2A – 2003 Gost 18465
Gost 18466 Gost 2533-88 Gost 6211-81
Gost 6357-81 Gost 7157-79 ISO 228
ISO 286 ISO 5855-2 1988 ISO 7-2:2000
ISO 965 ISO Metric BS 919/3 : 2007 JB/T 10971-2010
JIS B 0251 : 1998 JIS B 0252 : 1996 Metric ANSI/ASME B1.16M
Metrical DIN 13 : 01-1987 Metrical ISO 1502 : 1996-12 Metrical ISO 1502 : 1996-12
Metrical ISO 1502 : 1996-12 (DIN 13 : 1987) Metrical ISO 1502 : 1996-12 (ISO 965 : 1998) NPSM
NPT ANSI/ASME B1.20.1-2013 QJ 2761-95 R BS 21, 1985
R DIN 2999, 1986 R ISO 7/2, 1982 Trapezoidal DIN 103
Unified ANSI/ASME B1.2-1983 Unified BS 919/1 : 1960 Whitworth BS 919/2 : 1971 BS selected
Whitworth BS 919/2 : 1971 BSF Whitworth BS 919/2 : 1971 BSW

Related products