Description
Standard probe 4.0 used mostly for small rings where 5.0 mm probe is to large for a certain diameter & 3.5 mm probe to small to reach the bottom of the thread gage.
Standard probe 4.0 used mostly for small rings where 5.0 mm probe is to large for a certain diameter & 3.5 mm probe to small to reach the bottom of the thread gage.
Probe Length | 4.0 mm |
---|---|
Probe Shaft Diameter | Ø1.0 mm |
Effective working depth | 1.6 mm |
Min. Internal Diameter Ø | Ø 4.3 |
Max. Thread Angle | 30° |
Type Measurement | Metrical, Conical |
Probe Tip Angle | 45° |
Supported MasterScanner Models | All MSXP models, All XPL-C models, All XPL models |
Supported Clickons | All Clickons that support the diameter range of the Probe |
Probe material | Tungsten carbide styli (HM), Steel styli (HSS), Ceramic styli (Cer) |
Weight | 13 gram |