Description
Standard Probe 18.0 this probe can be used for gages with large pitches. The probe shaft is encased with an carbon sleeve this make the probe stiffer.
Standard Probe 18.0 this probe can be used for gages with large pitches. The probe shaft is encased with an carbon sleeve this make the probe stiffer.
Probe Length | 18.0 mm |
---|---|
Probe Shaft Diameter | Ø 7.0 mm |
Effective working depth | 5.4 mm |
Min. Internal Diameter Ø | Ø18.3 mm |
Max. Thread Angle | 30° |
Type Measurement | Metrical, Conical |
Probe Tip Angle | 45° |
Supported MasterScanner Models | ALL MSXP Modelsl, All XPL-C models, All XPL models |
Supported Clickons | All Clickons that support the diameter range of the Probe |
Probe material | Tungsten carbide styli (HM) |
Weight | 15 gram |